GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
8-44 Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later)
8-2-10-7 Regional Setup (For the system with language other than English ONLY) (cont’d)
For Russian or Greek Languages
1.) In Utility--> System--> General, set the Language as Russian or Greek. Save this setting, but do
not reboot the system yet.
2.) Press Regional Options, under Standards and Formats select Russian or Greek, under Location
select Russia or Greece. Press Apply.
3.) Select the Language tab, press Details, under Installed Services select the Russian or Greek
keyboard, under Default input language select Russian - Russian or Greek - Greek, press Apply,
Press OK.
Figure 8-105 General
Figure 8-106 Regional Options
To Next Page
Loading...
Need help?
General
