Chapter 5: Quick Steps
5495975-1EN Rev.9 5-6
© 2013-2017 General Electric Company. All rights reserved.
Manual Patient Entry (Worklist)
Add Patient
Use this procedure to enter the patient’s information into your system.
1. On the Worklist screen click [ADD PATIENT].
2. Enter the patient information.
CAUTION Make sure the patient’s name, ID number, birth date, and gender information are
entered correctly.
3. Click [SAVE] or [START EXAM].
Edit Patient Information
Patient information can only be edited if manually entered on system and exam has not started. Patient
information generated by a HIS/RIS cannot be edited on the system.
1. Select the procedure from the Worklist.
2. Click [PATIENT INFORMATION].
3. Edit the information as necessary.
4. Click [SAVE] to record the changes and return to the Worklist.
To Next Page
Loading...
