Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-80
© 2013-2017 General Electric Company. All rights reserved.
Removing The Batteries
The remote control uses 2 AA (LR6) batteries. Remove batteries from the Positioning Remote Control
when storing for over two months.
Figure 8-59 Removing The Battery Cover
1. Remove the battery cover.
2. Remove the batteries from the Positioning Remote Control.
Figure 8-60 Orientation of the Batteries
3. Re-insert the battery cover into the remote control.
Figure 8-61 Re-inserting the battery cover
To Next Page
Loading...
