Chapter 15: Preferences
5495975-1EN Rev.9 15-63
© 2013-2017 General Electric Company. All rights reserved.
Time Stamp
The detector contains an internal clock which only recognizes actual time when connected to a system.
Connection is made through wireless, tether or docking modes. The time noted in the timestamp column
is the system time. In wireless mode, when the detector battery is removed the internal detector clock no
longer has power to record time. Once battery or tether is used, power is restored to the detector’s
internal clock.
In the event that a bump event occurs during the time when the detector is not connected, the event will
be stored with the last known time.
The timestamp on the Bump Events page displays in red indicates that real time of event is unknown.
To Next Page
Loading...
