Chapter 15: Preferences
5495975-1EN Rev.9 15-17
© 2013-2017 General Electric Company. All rights reserved.
Worklist
Worklist preferences are available from the Utilities screen.
1. On the Worklist screen, click [UTILITIES].
2. Select Preferences > Worklist.
Figure 15-17 Preferences – Worklist screen
Default Query
The Worklist Default Query controls the amount of HIS/RIS information that appears on the Worklist and
allows you to enable and configure the auto-refresh function.
1. Complete or edit the Worklist Default Query screen (Figure 15-18). Table 15-6 describes the fields in
detail.
2. Click [SAVE] to change the Default Query.
To Next Page
Loading...
