Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-6
© 2013-2017 General Electric Company. All rights reserved.
Image display and manipulation
Image transfer to other workstations using the DICOM standard
Image transfer to a recordable CD or DVD
Figure 8-1 Acquisition Workstation
Note: Images displayed on the operator console image viewer are not intended for diagnostic use.
Radiology Control Interface Module (RCIM)
The Radiology Console Interface Module (RCIM) (Figure 8-2) controls the power and reset functions for the
system. The RCIM has the power on button, reset button, an emergency stop button, and indicator lights.
These functions are described in Table 8-3.
The RCIM is placed at the workstation between the monitors and the keyboard.
To Next Page
Loading...
