GE Optima XR646 - Multiple Wireless Detector Pop-Up Window

Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-20
© 2013-2017 General Electric Company. All rights reserved.
Multiple Wireless Detector Pop-up Window
Wireless Detector Window allows the user to select a primary wireless detector on the overhead tube
system.
Once the intended detector is selected, click the Make Active button. This will designate the selected
detector as primary.
Figure 8-9 Multiple Wireless Detector Pop-up Window
[EXPOSURE HOLD] Appears when there is some condition that prevents an x-ray from
being taken, such as the exam room door being open or the tube is
not in alignment with the receptor.
Press the button to view a list of all errors and interlocks that are
preventing the exposure. The items are removed from the list as
they are corrected. The button disappears when all errors and
interlocks are corrected.
System Status Messages Displays the last system status message.
Horizontal Vertical
Table 8-7 OTS control screen functions
Item Description