GE Optima XR646 - Identification and Compliance Plates; Identification Plate and Compliance Plate Locations

Chapter 2: Safety and Regulatory
5495975-1EN Rev.9 2-32
© 2013-2017 General Electric Company. All rights reserved.
Identification and Compliance Plates
Product identification labels can be found on the tops and sides of the cabinets, the rear of
monitors, and other exterior surfaces on the equipment. The types of system identification
compliance plates are located in Table 2-16.
Identification Plate and Compliance Plate Loca-
tions
Table 2-16 Identification Plate
Components Identification Plate Location
Bridge 5127305 Top of rear end cap
Overhead Tube
Suspension
(OTS)
5135678-3
or 5135678-4
Rear of largest column.
X-ray Tube Casing
MX100
09PS
46-155400G285 Rear of X-ray tube.
X-ray Tube Insert .6-
1.25
12.5 degree MX100
2336058 Rear of X-ray tube.
Collimator 5234954
5730663
Rear of collimator.
Workstation PC (Z420) 5843000-3
5843001-3
Top front of PC
Optima XR646 System
Rating Plate
5502131
Top of system cabinet
System rating plate for
Optima XR646 WSO
5730354
Top front of PC
System Cabinet 5397035 Top of unit, on right side towards front.
Jedi 80 Rad 1T 2374870 Top of unit, on right side towards front. Also inside
system cabinet, on left side of Jedi Control Assembly.
Jedi HV Tank 2186730 Inside system cabinet, on front of Jedi HV Tank
Digital Radiographic
Table
GCTBL-C2 Right side
Table Ion Chamber 5143310 Inside table detector housing.
System Label for
China
5400528 Top of cabinet unit