Chapter 4: General Information
5495975-1EN Rev.9 4-4
© 2013-2017 General Electric Company. All rights reserved.
Note: Wait approximately 30 seconds after a shutdown to power up the system.
Login and Log off
The following sections apply if the system is configured to use the Login feature in the Utilities User Inter-
face, Refer to Appendix A: Login Administration
for information on administering the login function.
Standard Login
The Login screen (Figure 4-4) appears when the system is started, reset, and after a user logs off. The sys-
tem may also be configured to display the Login screen if the system has been inactive for a specified
period of time (inactivity timeout).
Figure 4-4 Example login screen.
Follow this process to login to the system.
1. Start up the system or log off the previous user.
The Login screen appears.
2. Enter your Login Name.
3. Enter your Password.
4. Click [LOGIN].
The Worklist appears. Refer to Chapter 9: Worklist
for more information.
To Next Page
Loading...
