GE Optima XR646 - Perform C-Echo Test

Chapter 15: Preferences
5495975-1EN Rev.9 15-8
© 2013-2017 General Electric Company. All rights reserved.
Perform C-Echo Test
Use this function when you want to check to see if the system is communicating with a particular net-
work host.
1. Select a host from the Network Hosts list.
2. Click [C-ECHO TEST].
 A message appears to notify you if the test passed or failed.
 A “passed” message means that the network host is working and that you can retrieve exams from
it or transfer exams to it.
Failed C-Echo Test
A “failed” message means that the system could not contact the network host.
Perform the following tasks to resolve the problem:
 Re-try the test at a later time. The host may be temporarily unavailable.
 Confirm the host configuration on the Edit screen.
 If the problem persists, contact your technical support group or system administrator.
Printers
Follow this process to access the Network Connections screen.
1. On the Worklist screen, click [UTILITIES].
 The System-System screen appears.
2. Click [NETWORK CONNECTIONS].
 The Network Connections screen (Figure 15-7) appears.
Figure 15-7 Network Connections screen