GE Optima XR646 - Foot Control; Vertical Adjust and Detector Tilt Handle

Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-36
© 2013-2017 General Electric Company. All rights reserved.
Vertical Adjust and Detector Tilt Handle
1. Grasp the handle and depress the inner switch (Figure 8-21).
2. Move the arm up or down.
3. Release the switch when the desired height is reached.
Figure 8-21 Vertical adjust and receptor tilt handle
Foot Control
The foot control (Figure 8-22) moves the receptor vertically.
1. Press the UP or DOWN pedal two consecutive times (“double-tap”) and hold. This activates the foot
pedal.
2. Hold the foot pedal down until the desired height is reached.
3. Release the pedal to stop movement.
Figure 8-22 Foot control
1. Up
2. Down
1
2