Chapter 4: General Information
5495975-1EN Rev.9 4-3
© 2013-2017 General Electric Company. All rights reserved.
Shutdown
CAUTION Do not to turn the system off if the tube fan is running. Wait for the tube to cool
and for the fan to stop.
1. Close all current exams. (Refer to Chapter 10: Image Acquisition-End Exam (p. 10-31) for more infor-
mation.)
2. Click the [UTILITY] button at the top of the Worklist screen.
Figure 4-2 Utility button
3. Select System on the Utilities screen.
Figure 4-3 Utilities – System screen
4. Click [SHUTDOWN].
A message appears: “The system will be shut down. NOTE: Please allow for the tube fan speed to
slow (if running high) before shutting down system.”
5. Click [YES] to proceed with shut down.
The system powers off and the monitors go blank.
[CANCEL] stops the system from shutting down and returns you to the Utilities screen.
To Next Page
Loading...
