Chapter 15: Preferences
5495975-1EN Rev.9 15-12
© 2013-2017 General Electric Company. All rights reserved.
Figure 15-10 Add Printer – Film Sizes tab
Remove DICOM Printer
Follow this process to remove a printer.
1. From the Network Connections screen, select the printer.
2. Click [REMOVE].
A message appears: “Are you sure you want to remove (printer name)?”
3. Click [YES].
[CANCEL] closes the message and returns you to the Network Connections screen without remov-
ing the connection.
The printer is removed.
Table 15-5 Add Printer screen– Film sizes description
Function Description
Film sizes (8 x 10in) Selects the sizes of film available for the printer.
Pixel size: W (width) Sets how wide the film is in pixels.
This value is provided by the printer manufacturer based on what the printer
supports.
Pixel size: H (height) Sets how high the film is in pixels.
This value is provided by the printer manufacturer based on what the printer
supports.
To Next Page
Loading...
