GE Optima XR646 - Change Looks Processing (Vertical Equalization)

Chapter 13: Advanced Applications
5495975-1EN Rev.9 13-30
© 2013-2017 General Electric Company. All rights reserved.
Figure 13-35 Preview and Apply to Image buttons
8. When satisfied with image alignment, click [APPLY TO IMAGE] (Figure 13-35).
 [APPLY TO IMAGE] initiates the system to perform the following tasks:
– Apply the new registration and all processing
– Re-process sub-images (creates new sub-images)
– Create new pasted composite image
– Add re-pasted images to the existing processed series
 You will automatically be returned to the main Image Viewer screen.
9. Click [CLOSE] to leave the manual re-pasting screen and return to the Image Viewer screen if you do
not want to apply registration to the image.
Change Looks Processing (Vertical Equalization)
A custom look can be changed or applied through the Image Processing Preferences Editor screen.
Refer to Chapter 15: Preferences
-Build Custom Looks (p. 15-51) for more information about looks pro-
cessing.
For Auto Image Paste acquisitions, the Image Processing Preferences Editor allows adjustment of vertical
equalization strength.
1. Select the Image Processing Tab from the Image Tools panel.
2. Click [EDIT PROC].
 The Image Processing Preferences Editor screen (Figure 13-36) appears on the monitor.
3. Select an undefined custom look from the Look drop-down.
4. Enter a name for the Look Description.
5. Adjust the parameters as described in Chapter 15: Preferences
-Build Custom Looks (p. 15-51).
6. Adjust the Vertical Equalization Strength.
7. Click [PREVIEW] to see the effect of the changes.
 The preview is shown on the Image Viewer screen.
 Continue to adjust the look as necessary.
8. When satisfied with the looks processing, click [SAVE].
9. Click [APPLY TO IMAGE].
10. Click [CLOSE].