Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-18
© 2013-2017 General Electric Company. All rights reserved.
OTS Control Screen
The OTS control screen displays the SID, tube angle, and column rotation. The control screen allows you
to change the kV, mAs, receptor, and FOV. The control screen is able to change orientation from horizon-
tal to vertical as the OTS is rotated (Figure 8-8).
Auto Image Paste and VolumeRAD protocols have alternative OTS control screens. Refer to Chapter 12:
Image Management and Chapter 13: Advanced Applications for more information.
Figure 8-8 OTS control screen in horizontal and vertical orientation.
Horizontal Vertical
Table 8-7 OTS control screen functions
Item Description
Patient Name If enabled on your system, shows the patient name for the current
exam. If this feature is not enabled, the field will be blank.
Receptors Selects the receptor. The availability of the receptor depends on if it
is enabled through the protocol setup on the Acquisition
Workstation.
If the receptor is not defined in the selected preset procedure, the
receptor is not selectable from the OTS.
Multiple Wireless Detector Icon. Refer to Figure 8-9for more
information.
To Next Page
Loading...
