Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-81
© 2013-2017 General Electric Company. All rights reserved.
Auto Image Paste Patient Positioner (Option)
Auto Image Paste is a purchased option for the Optima XR646. The positioner is used to determine the
correct Center of Interest (COI) and to protect the patient from the moving receptor during image paste
acquisition.
Refer to Chapter 13: Advanced Applications
-Auto Image Paste Patient Positioner with Integrated Foot
Step (for Wallstand) (p. 13-14) for more information.
System Cabinet
The system cabinet (Figure 8-62) houses the electronics for the Optima XR646. GE Service personnel can
open the front of the cabinet to access the electronics.
The cabinet dimensions are as follows:
Height: 130.17cm (51.25 in.) NOTE: Height does not including the back flange at the top of the cabinet
Width: 90.80cm (35.75 in.)
Depth: 71.75cm (28.25 in.)
Figure 8-62 System cabinet
To Next Page
Loading...
