GE Optima XR646 - Installation; Standard Table Hand Grips and Compression Band

Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-72
© 2013-2017 General Electric Company. All rights reserved.
Installation
1. Depress the lock to release the clamp or hand grip (Figure 8-52).
Figure 8-52 Clamp and hand grip released
2. Position the clamp or hand grip; then depress the handle.
3. Lock the compression band or hand grip (Figure 8-53).
Figure 8-53 Clamp and hand grip locked
Standard Table Hand Grips and Compression Band
1. Adjustment
screw
2. Safety screw
3. Lock