Chapter 7: Digital Detector
5495975-1EN Rev.9 7-10
© 2013-2017 General Electric Company. All rights reserved.
Figure 7-11 Battery Charger
Battery Calibration
When battery calibration is needed, insert the battery in the left side or slot of the battery charger. Press
the calibrate button shown in Figure 7-12. Battery calibration is indicated by a flashing yellow light.
Figure 7-12 Battery Calibration
Detector Charging Bin
The Detector Charging Bin is used to charge the battery, store the detector and store the detector grid.
Figure 7-13 Detector Charging BIN
To Next Page
Loading...
