Chapter 8: System Hardware Overview
5495975-1EN Rev.9 8-8
© 2013-2017 General Electric Company. All rights reserved.
6. X-ray
Exposure
indicator
Lights up when x-rays are being emitted, including tube warm
up and QAP.
The system beeps as X-rays are produced when the Prep/
Expose button on the Hand-switch is pressed. The tone ends
when the exposure is terminated or completed.
7. Auto
Positioning
button
Auto Positioning button is not active in this product.
8. Collimator
field light
button
Turns the collimator field light on or off.
9. Volume
control
buttons
Adjusts the volume of the system beeps.
Table 8-3 RCIM controls
Control Description
To Next Page
Loading...
