Chapter 12: Image Management
5495975-1EN Rev.9 12-4
© 2013-2017 General Electric Company. All rights reserved.
Exam, series, and images list Lists the images saved in the local database categorized by exams
and series. The following information is displayed:
Exams - the exams saved in the local database
Series detail - the series for the selected exam
Image list - the images for the selected series
Image preview - a representative thumbnail of the selected image.
Figure 12-2 shows how the information is organized.
Destination Selects where images are to be copied or saved. The first button
switches between the local unit and any configured network hosts.
Refer to Copy Exams and Images
(p. 12-7) for more information.
[DELETE] Deletes the selected exams, series, or images from the local database.
Refer to Delete Exams, Series, or Images
(p. 12-11) for more
information.
[VIEWER] Opens the Image Viewer screen and shows the images in the selected
series. Images may be adjusted on the Image Viewer screen.
Refer to Chapter 11: Image Viewer
for more information.
[TRANSFER LOG] Shows a list of transferred exams and their destinations.
Refer to Copy Exams and Images
(p. 12-7) for more information.
Database size Shows how many images are currently saved to the local database
and approximately how many more images the database is able to
accommodate.
Refer to the following sections for more information:
Copy Exams and Images
(p. 12-7) to save images to another data-
base or disk
Delete Exams, Series, or Images
(p. 12-11) to remove images
System status Displays the last system status message.
[MESSAGE LOG] Displays the message log since the last system re-start.
Table 12-1 Image Management screen functions
Function Description
To Next Page
Loading...
