GEDA
®
300 Z / ZP
Page 15 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
3.5 Dimensions and weight
NOTE
The installation of optional equipment (such as e.g. roof, assembly bridge,
etc.) increases the dead weight. The useful load decreases accordingly.
3.5.1 Base unit / platform / cable box:
Weight 730 kg
Platform internal dimensions 1.32 m x 0.96 m
3.5.2 Mast section
Length 1.5 m
Weight 44 kg (52 kg with assem-
bly parts)
Mast oversail for operation max. 3 m
Mast oversail for assembly max. 5.5 m
Fixing distance 6 m
Vertical distance of mast fixtures max. 6 m
Vertical distance of travelling cable guide max. 6 m
3.5.3 Landing-level safety gates
The hoist GEDA 300 Z/ZP has been type-tested together with the GEDA
landing-level safety gates:
GEDA COMFORT Item-No.: 01212
GEDA STANDARD Item-No.: 01217
GEDA STANDARD Basic Item-No.: 01268
and fulfils the requirements for safe transfer between landing level and car.
GEDA lifts with type test certification must also only be used in combina-
tion with tested GEDA landing-level gates. For assembly of landing-level
safety gates see corresponding instruction manual.
To Next Page
