GEDA 300Z - 15.5.1 Dismantling the accesses

GEDA
®
300 Z / ZP
Page 73 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
15.5.1 Dismantling the accesses
 Loosen plug-in connections
(1) of the accesses (A-C)
on the base assembly.
 If necessary label plug-in
connections (1) to prevent
any mix-up.
 Loosen the bolts (2) of the
frame at the access (A-C)
and C and unscrew approx.
10 mm ( = 8 mm).
IMPORTANT
For access C also loosen the bolt
(5) from the platform post (6).
 Release and remove ac-
cesses.
WARNING:
Unfastening the frame inhibits the
protective function of the ac-
cesses. Check the access bolts
after each installation.
1
B
C
A
2
2
5
6