GEDA
®
300 Z / ZP
Page 28 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
4.4 Linking to other machinery
Control-related or functional linking to other machinery is prohibited and
releases GEDA from any liability.
4.5 Prohibition of certain activities
The following activities may only be carried out by GEDA employees due
to error sources that are potentially unrecognisable (to the operating com-
pany):
Repairs to the safety gear
Changes to the control programs
4.6 Machine operation
Operation is only permitted in accordance with:
the information on proper use.
the information on the machine limitations.
the information on operating and environmental conditions.
all laws / regulations that must be complied with by the operating
company.
all other information in this manual.
Starting or operating the machine without having read the manual before-
hand is strictly prohibited. The manual must be kept safe for continued and
future use with the machine.
GEDA shall not be liable for any damage arising from non-compliance with
the manual.
4.7 Foreseeable misuse
Any use of the machine that deviates from the conditions specified above
and from the stated purpose is strictly prohibited.
This in particular includes use:
without correctly installed landing-level safety gates.
at a greater distance from the building / scaffolding than permitted.
without designation of the hazard area.
in a potentially explosive area.
as a crane, means of travel, platform for bungee jumping, convey-
ance of persons / materials to publicly accessible places.
as a transport platform for persons without roof mounted, if there is
a risk of objects falling into the car.
To Next Page
Loading...
