GEDA 300Z - 7.4 First commissioning; daily commissioning

GEDA
®
300 Z / ZP
Page 38 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
 Safety rails on-site may only be removed once the landing-level
safety gates have been installed.
 The hoist may only be operated once all landing-level safety de-
vices have been fully installed and checked.
7.4 First commissioning / daily commissioning
Make sure that:
 All safety features are present and functioning.
 All connections are properly connected.
 All parts are correctly installed.
 No tools or other parts are inside or on the machine.
 No tools or other parts are in the travel path of the machine.
 All warning and instruction notices on the machine are present in
their entirety, are clearly visible and undamaged.
 Illegible or missing warning and instruction notices must be re-
placed immediately.
 The tests specified in national regulations must be performed prior
to commissioning.