GEDA
®
300 Z / ZP
Page 66 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
14 Cleaning
Execution, necessary safety clothing, cleaning agents and equipment ac-
cording to the applicable instructions from the operating company.
14.1 Cleaning the machine inside and out
Clean all surfaces thoroughly.
Clean switch cabinets and control panels separately.
Signpost wet areas and secure against access.
14.2 Cleaning the area around the machine
Execution, cleaning agents and equipment according to the appli-
cable instructions from the operating company.
DANGER
Danger to life
Risk of fire and explosion as a result of using
combustible cleaning materials.
Only use suitable, non-combustible cleaning
agents.
Do not use steam-jet equipment / high-pressure
cleaners. This can damage electrical components.
Do not touch sockets, cables or electrical compo-
nents with wet or damp hands.
Cleaning work on live components must only be
carried out by qualified electrical personnel.
Wear personal protective equipment.
To Next Page
Loading...
