GEDA 300Z - Safety Information; 4.1 Proper use; 4.2 Machine limits; 4.3 Modifications; alterations

GEDA
®
300 Z / ZP
Page 27 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
4 Safety information
This safety information must be read and observed by all persons who are
entrusted with work on the machine or who supervise or instruct such
people. Non-compliance with the safety information releases GEDA from
any liability.
4.1 Proper use
The machine described in this manual is solely intended for:
temporary use on construction sites as:
 Construction hoist:
For the transport of material
 Transport platform:
For the transport of material and persons (max. 3 persons)
 Mast-guided climbing platform:
For the execution of construction work from the car
 Scaffolding assembly hoist:
For the assembly of scaffolding and mast from the car.
The load-bearing capacities specified in the column for technical data
(weight / persons) must be complied with.
Improper use, non-compliance with the manual, the use of insufficiently
qualified personnel, and the use of non-approved spare parts excludes
any liability on the part of the manufacturer.
4.2 Machine limits
The machine may only be used while complying with:
 the technical data / features.
 the max. permissible load bearing capacity and number of persons.
 the defined operating and environmental conditions.
4.3 Modifications / alterations
Unauthorised modifications / alterations can have an unforeseeable influ-
ence on the safety of the machine. For this reason, unauthorised modifica-
tions / alterations are prohibited. Any unauthorised modifications that are
carried out shall exclude the manufacturer from any liability. This also in-
cludes welding, grinding and burning operations on the machine, as well
as the control programs.