GEDA
®
300 Z / ZP
Page 60 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
11.7 Holder for individual support frames
Loads that are taller than the platform (e.g. scaffolding tubes) can be
transported securely using this holder.
Bolt the vertical tubes to the
platform struts using the spe-
cial couplings (3).
Fit a crosspiece (2) at an eas-
ily reachable height (approxi-
mately 2 m) using scaffold
couplers.
Clamp the scaffold parts
holder (1) to the crosspiece.
11.8 Cold package
The machine can no longer be operated at
temperatures below −20 °C.
The cold package monitors the ambient tempera-
ture and disables the upward travel path at lower
temperatures, so that it is only possible to travel
to the ground station.
11.9 Operating time indicator
An operating hours counter (2) can be installed in
the sliding carriage switch cabinet to detect the
operating hours (motor running time).
WARNING
The switch cabinet may only be opened by
a qualified electrician.
2
1
3
2
1
To Next Page
Loading...
