GEDA 300Z - 18.4 Visual inspections

GEDA
®
300 Z / ZP
Page 85 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
Documenting the results
The operating company must document the results of inspections. The
documentation must be kept for a reasonable period of time – however at
least for the entire lifetime of the machine. Proof of performance of the last
inspection must be attached to the machine.
18.4 Visual inspections
Entire machine
 Damaged load-bearing elements / deformations.
 Travel path of the machine clear.
 Loose or fallen parts.
 Damage to the car.
 Oil / grease leaks.
 Discolourations and soiling, corrosion, cracks.
 Operation control light is on.
Warning and instruction notices
 All present and legible.
Safety equipment
 All present.
 Functional.
 No tampering.
Switch cabinets
 Burnt / scorched areas.
 Discolourations.
 Moisture.