GEDA
®
300 Z / ZP
Page 42 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
Test the parts to ensure that they are functioning correctly after the
work. Make sure that no hazards will arise as a result of the ma-
chine being started up.
Only carry out welding, burning and grinding work on the machine
after consultation and approval from GEDA.
7.8 Cleaning
Risk of fire and explosion as a result of using combustible cleaning
materials.
Only use suitable, non-combustible cleaning agents.
Label damp areas with the appropriate warning signs.
Wear personal protective equipment.
Do not use any alkaline or acidic solutions or other aggressive
agents for cleaning.
Do not use steam-jet equipment / high-pressure cleaners. This can
damage electrical components.
Do not touch sockets, cables or electrical components with wet or
damp hands.
Cleaning work on live components must only be carried out by qual-
ified electrical personnel.
7.9 Conduct in an emergency
Company instructions relating to conduct in an emergency and the
evacuation plan must be observed.
Never use parts of the machine as a climbing aid.
Never climb hands-free. Always hold on with at least one hand.
Keep all climbing aids free of dirt and soiling.
To Next Page
