GEDA 300Z - 11.5 Converting access to the front end; adding a second access

GEDA
®
300 Z / ZP
Page 58 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
11.5 Converting access to the front end / adding a second ac-
cess
The standard access (1) to the car
can - if the intended purpose of the
hoist so requires - be mounted onto
position (A).
Alternatively a second access (2)
can also be mounted.
WARNING
Only one access (1) or (2) can be
electrically monitored. The unmoni-
tored ramp may only be opened at
the ground station.
NOTE
Mounting a second access reduces
the payload by approximately 55 kg.
Assembly
Assembly is detailed in a specialist
instruction manual supplied with the
product.
2
1
A