GEDA
®
300 Z / ZP
Page 32 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
5.2 Accessibility to necessary information
The operating company must make the manual required for the relevant
task available to all persons who are commissioned with operation, servic-
ing and maintenance.
The operating company must ensure that the individuals in question have
read and understood the necessary manuals.
The same applies to all relevant safety data sheets, operational instruc-
tions, accident prevention guidelines, and instructions issued by suppliers
of purchased parts and service materials.
Depending on how the company is organised, the manuals may have to
be made available to other individuals / departments.
5.3 Checking the correct and proper condition and use
At regular intervals, the operating company must take appropriate meas-
ures to check that the machine is being used according to the intended
use, that the machine has not been modified or tampered with and that all
parts are fully functional.
5.4 Identifying hazards at the place of use
The operating company must identify all hazards at the place of use of the
machine and must take the necessary health and safety measures.
5.5 Machines / systems requiring registration
The operating company must register machines / systems which require
registration with the responsible national authorities in accordance with the
contents and deadlines of the regulations / obligations.
5.6 Recurring inspections
The operating company must have the recurring inspections, which are
stipulated and regulated by national law, carried out and the results docu-
mented in an appropriate way.
To Next Page
Loading...
