GEDA
®
300 Z / ZP
Page 81 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
15.6.6 Checks after assembly / checks prior to initial commissioning
Perform checks as specified in the section Checks.
16 Disassembly
Disassembly normally takes place in reverse order.
17 Disposing of the machine
Dismantle the equipment properly at the end of its service life and dispose
of in an environmentally friendly way according to national provisions.
It is prohibited to recycle parts from a machine that is being disposed of for
use in other machines, or to assemble such parts to produce a new ma-
chine.
Recommendation:
Contact the manufacturer or commission a specialist company to handle
disposal requirements in accordance with regulations.
To Next Page
Loading...
