GEDA 300Z - Obligations of the Operating Company; 5.1 Obligation of training; qualification

GEDA
®
300 Z / ZP
Page 31 of 101 Rev.: 001
BL 121 EN Translation of the original operating manual 2011 / 05
5 Obligations of the operating company
5.1 Obligation of training / qualification
The operating company clearly defines the responsibilities of the person-
nel for operation / installation / maintenance. The operating company is
obliged to train all persons authorised to use the machine in the correct
handling of the machine before using it for the first time, according to the
respective area of activity and responsibility of the authorised individual
and using practical exercises.
Training will cover at least the following:
 the scope and limitations of the area of activity and responsibility of
the group of people in question.
 safety-conscious conduct.
 Avoidance of hazards during operation.
 conduct in an emergency.
 application of the emergency / evacuation plan.
 correct machine operation.
 the meaning of the warning signs, notices and pictograms.
 use and inspection of the personal protective equipment.
 how to handle operating materials and cleaning agents.
Finally, the operating company must check that each person is capable of
operating the machine independently and correctly.
This training must be documented and repeated at regular intervals.
New personnel may only operate the machine under the supervision and
instruction of experienced personnel.
Maintenance and repair work must only be carried out by personnel quali-
fied for this work. The use of non-qualified personnel is prohibited and re-
leases GEDA from any liability.