EasyManuals Logo

Genesis G70 User Manual

Genesis G70
548 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
5-40
Convenience features
OIK053374N
2. The indicator (4) and (6) operates as
below, if your garage door opener has
Two-Way Communication
functionality.
• If the indicator (4) flashes in Orange,
it indicates that the garage door is
"Closing".
• The indicator (4) turns solid green
once the garage door has closed.
• If the indicator (6) flashes in Orange,
it indicates that the garage door is
"Opening".
• The indicator (6) turns solid green
once the garage door has fully
opened.
• If the indicator (4) or (6) does not turn
to green, it indicates that the last
status of garage door was not
received properly. The HomeLink
mirror tries to receive the last known
status of the garage door for a few
seconds.
3) Recalling Garage Door Status
HomeLink mirror with Two-Way
Communication provides a way to view
the last stored message from the garage
door opener. In order to recall the last
known status of the last activated device,
press the buttons "1 and 2" OR "2 and 3"
simultaneously.
• If the indicator (4) appears solid Green,
it indicates that the last activated
device was "closed" properly.
• If the indicator (6) appears solid Green,
it indicates that the last activated
device was "open" properly.
3. Erasing HomeLink® Buttons
1) Erasing and Reprogramming a Single
HomeLink® Button:
1. Press and hold the desired HomeLink
button you want to re-program. DO
NOT release the button.
2. The HomeLink indicator light (7) will
illuminate solid green. Release the
button as soon as the HomeLink
indicator light (7) begins to flash
orange, usually about 20 seconds.
3. Proceed with the steps in the
"Programming a New HomeLink
Button" section.
Information
If you do not complete the
re-programming of a new device to the
button, it will revert to the previously
stored programming.
2) The following instructions will erase
ALL HomeLink® programming from ALL
buttons:
OIK053375N
1. Press and hold the buttons (1) and (3)
simultaneously.
2. The HomeLink indicator light (7) will
illuminate solid Orange for about 10
seconds.
0_IK_PE_en_US.book Page 40

Table of Contents

Other manuals for Genesis G70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis G70 and is the answer not in the manual?

Genesis G70 Specifications

General IconGeneral
BrandGenesis
ModelG70
CategoryAutomobile
LanguageEnglish

Related product manuals