Table of Contents Zoom20/30/35 Pro | 5
13 Calibration
83
13.1 Overview 83
13.2 Preparation 83
13.3 Calibrating Line-of-Sight and Vertical Index Error 84
13.4 Calibrating the Compensator 85
13.5 Calibrating the Circular Level of the Instrument and Tribrach 86
13.6 Inspecting the Laser Plummet of the Instrument 86
13.7 Servicing the Tripod 87
14 Care and Transport
88
14.1 Transport 88
14.2 Storage 88
14.3 Cleaning and Drying 88
15 Technical Data
90
15.1 Angle Measurement 90
15.2 Distance Measurement with Reflectors 90
15.3 Distancer, Measurements without Reflectors (Reflectorless mode) 91
15.4 Distance Measurement Reflector (Long Range) 92
15.5 Conformity to National Regulations 92
15.5.1 Dangerous Goods Regulations 92
15.5.2 Zoom20/Zoom20 Pro 92
15.5.3 Zoom30 Pro/Zoom35 Pro 93
15.6 General Technical Data of the Instrument 93
15.7 Scale Correction 95
15.8 Reduction Formulas 96
16 Software Licence Agreement
97
17 Glossary
98
Appendix A Menu Tree
100
Appendix B Directory Structure
101
Appendix C Connector PIN Layout
102
To Next Page
Loading...
