3-74
CHAPTER 3 Settings and Measurement
<Overwrite mode is On>
pattern 1
All eight blocks have not been recorded. All blocks are black.
This is recorded from the rst block (the block with yellow line scheduled to be captured next time).
1 2 3 4 5 6 7 8
First to fourth blocks have been recorded.
The fth block is being recorded now (The yellow line recording is displayed.).
Recorded Recording Not recorded
1 2 3 4 5 6 7 8
All eight blocks have been recorded. All blocks turn green.
Next time, it is recorded from the rst block (the block with yellow line scheduled to be recorded
next time).
1 2 3 4 5 6 7 8
Overwriting operation is sequentially repeated, but the fth block is not recorded because the
trigger is not established.
1 2 3 4 5 6 7 8
Overwriting operation is sequentially repeated and the fth block is waiting for a trigger.
1 2 3 4 5 6 7 8
Overwriting operation is sequentially repeated and the fth block is being recorded now.
1 2 3 4 5 6 7 8
pattern 2
1 2 3 4 5 6 7 8
Currently, all blocks are green.
If the last recorded block is the second block, it is recorded from the third block (The yellow line
recording is displayed.).
After that, the same operation as pattern 1 starts.
This is the last recorded block.
To Next Page
Loading...
