3-53
CHAPTER 3 Settings and Measurement
(1) Free Running
In Free Running, rst start the settings for data capture.
The current input signal can be viewed in the waveform or digital value.
Main operations available during Free Running
Measurement condition setting change The [MENU] key is used to change various setting items in setting
menus.
SPAN/TRACE/POSITION change The [SPAN/TRACE/POSITION] key is used to change settings.
Display mode switch The [DISPLAY] key is used to change the display mode.
File operations The [FILE] key is used to perform le-related operations.
Data replay The [REVIEW] key is used to replay captured data.
Time axis change The [TIME/DIV] key is used to change the time axis scale.
Operation of screen display
The information in the screen display can be changed by switching the channels.
The operation of screen display can be changed during Free Running, capturing, and replaying.
<Screen display when the CH1 is selected
on the MONITOR screen during Free Running>
The scale of the selected
channel is indicated.
The display channel can be
switched by the
keys.
The selected channel is displayed without coloration.
To Next Page
Loading...
