GRAPHTEC GL980 - Simple Setting of RANGE;SPAN;POSITION;VERNIER

3-48
CHAPTER 3 Settings and Measurement
In the "MONITOR" display during replaying, you can move the cursor of the selected XY-CH. Use the
keys to move the X-axis cursor, and use the keys to move the Y-axis cursor.
key key
key
key
Simple setting of RANGE/SPAN/POSITION/VERNIER
Press [SPAN/TRACE/POSITION] key to perform each setting.
MONITOR RANGE/SPAN POSITION VERNIER
Digital value is display.
(Default status)
The RANGE/SPAN
value (waveform
amplitude) can be
changed.
POSITION (center
position of waveform)
can be changed.
VERNIER (ne
amplitude adjustment
of waveform) can be
changed.
XT screen