GRAPHTEC GL980 - Capture Bar; During Recording

3 -11
CHAPTER 3 Settings and Measurement
19. Capture bar
(1) During recording
Displays the elapsed time and the usage status on the internal memory, the SD card and the USB
memory usage.
Elapsed time Remaining time for data capture
Used capacity of internal memory, SD
card and USB memory
Remaining capacity of internal memory, SD
card and USB memory
Total capacity of internal memory, SD card and USB memory
For example, when you are using a 4GB SD card with 100MB already used, the total capacity of the SD
card is 4GB with 100MB used space, and the available space of the SD card would be approximately
3.9GB. As the captured time elapses, the usage of the SD card increases and the remaining capacity of
the SD card decreases.
The remaining recording time indicates the remaining capacity of the SD card.
However, when the relay capturing function is set to Off, and when the remaining capacity of the SD card
exceeds 4GB, the remaining time that can be captured to 1 le will indicate 4GB.
* Remaining time which is more than 99999 hours is displayed as "++++:++:++".
(2) During data replay
Show the display position, cursor position, and trigger position graphically.
Range for which a waveform is currently
displayed
Capture data size
Cursor A position Cursor B position