GRAPHTEC GL980 - Mail Send Server Settings

3 -110
CHAPTER 3 Settings and Measurement
(2) Mail send server settings
Setting Description
Outgoing mail
settings
Send (SMTP) Server Name Set the E-mail Send Server Name (server address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notied from the mail provider.
SMTP port number Set the port number of the E-mail Send Server.
0 to 65535
* Enter the port number notied from the mail provider.
Time zone Set the time zone.
UTC-12:00 to UTC+13:00
* This is a common setting with time zone setting of POP3 server
setting and NTP setting.
SMTP authentication method Set authentication method for SMTP-AUTH.
PLAIN, LOGIN, CRAM-MD5, DIGEST-MD5
SMTP-AUTH Set the SMTP authentication method.
Off, POP before SMTP, SMTP-AUTH
POP3 server settings You can set this when POP before SMTP is selected in SMTP
authentication method.
Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP user name Set the user name to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP password Set the password to log in to the SMTP server.
Enter the string of up to 63 characters.
SMTP encryption Set the encryption of the SMTP server.
Off, StartTLS, Over SSL
* Set the encryption notied from the mail provider.
E-mail Address Set your own E-mail address.
Enter the string up to 63 characters.
Test email A test E-mail is sent.