GRAPHTEC GL980 - FTP;WEB Server Settings; Mail Settings; Mail Send Settings

3-109
CHAPTER 3 Settings and Measurement
(5)-4 FTP/WEB server settings
Set the FTP server/WEB server as this device.
(1)
(5)
(2)
(6)
(3)
(7)
(4)
(8)
Selection item Description
FTP Client (1) FTP Server Enter the domain name or IP address of the FTP server. (Up to 127 characters)
(2) User Name Enter the user name of the FTP account. (Up to 31 characters)
(3) Password Enter the password of the FTP account. (Up to 31 characters)
(4) Port Number Enter the port number of a port to be used for FTP. It is normally 21. (0 to 65535)
(5) PASV Mode Make the passive mode setting.
ON : Should be set for communication with an external FTP server in a rewall environment.
OFF : Should be set for communication with an FTP server in a normal network environment.
(6) FTP Server
Connection
Test
Press right
key to execute (Performs connection test to the FTP server.)
When the connection test is performed, a message is displayed.If connection cannot be
established, check the settings and perform the connection test again.
* If the connection test is passed, the following message is displayed.
FTP server (7) Port number Set port number of the FTP server installed in this device. (0 to 65535))
WEB server (8) WAB number Set port number of the WEB server installed in this device. (0 to 65535)
(5)-5 Mail settings
Enter the settings for emails on the device.
When mail send setting is complete various notication setting (Alarm, low battery, drive low capacity (only
during capturing)) is sent. Also, when periodic notication is set, it is sent according to the set time.
(1)
(2)
(1) Mail send settings
Setting Description
Outgoing mail
settings
Destination
Settings
TO Set the destination (address) of the E-mail.
Enter the string of up to 63 characters.
CC1 to CC3 Set the destination of the E-mail (broadcast 1 to 3).
Enter the string of up to 63 characters.
Subject Set the subject of the E-mail.
Enter the string of up to 63 characters.
Notication
settings
Alarm Set the E-mail send when an alarm occurs.
Off, On
Low battery Set the E-mail send when the internal battery lowers.
Off, On
Drive free space Set the E-mail send when the drive free capacity during recording is
low.
Off, On
Periodic
notications
Set the periodic notication E-mail send.
Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours, Specied time
* You can set the specied time to the hours : minutes : seconds.