GRAPHTEC GL980 - Enter Character Selection; Confirmation of Entered Character String; User Character String Enter

3-128
CHAPTER 3 Settings and Measurement
< Enter character selection >
(1) Select the character type to be entered in operation selection.
(2) Use the key to move the enter selection cursor to the character selection eld.
(3) Use the , , , keys to move the enter selection cursor to the character you want to enter.
(4) Use [ENTER] key to enter a single character.
The entered character is overwritten by the character string cursor and the character string cursor moves
one character to the right.
< Conrmation of entered character string >
(1) Press the key several times to move the enter selection cursor to the operation selection line.
(2) Select [OK] with the keys and conrm it with [ENTER] key.
< User character string enter >
((1) Select "User" in operation selection.
(2) Use the keys to move to the user character string you want to enter.
(3) Enter the user character string with [ENTER] key.
In the enter user character string, the character string from the character string cursor is overwritten. The
character string cursor moves one character to the right from the overwritten character string.