GRAPHTEC GL980 - Real Time Statistical Calculation Display; Statistical Calculation Value

3-38
CHAPTER 3 Settings and Measurement
Logging display
Calculation mark
CH annotation
CH number
Level display
Measured value
CH number : Measured CH number.
Calculation mark : Displayed when calculation between channels is set.
CH annotation : Annotation set to CH is displayed.
Measured value : Currently measured value is displayed.
Level indication : Level position of measured value is displayed with a pointer.
Real time statistical calculation display
Analog CH only Analog CH + Logic CH Analog CH + Pulse CH
Measured value Max. value Min. value P-P value Average value
Calculation mark
CH annotation
CH number
CH number : Measured CH number.
Calculation mark : Displayed when calculation between channels is set.
CH annotation : Annotation set in CH is displayed.
Measured value : Currently measured value is displayed.
<Statistical calculation value>
Use DISP menu, [FUNC] key and [QUIT] key to clear the statistical calculation during Free running.
Also, the statistical calculation is cleared when the capturing is started.
Maximum value : Maximum value after clearing
Minimum value : Minimum value after clearing
P-P value : A value between the maximum value and minimum value.
Average value : Average value after clearing