GRAPHTEC GL980 - Connecting the Humidity Sensor

2-23
CHAPTER 2 Checks and Preparation
2.13 Connecting the Humidity Sensor
Connect the + and - lead wires of the humidity sensor (the B-530: Option) to the selected terminals, then
insert the round connector into the 5V OUT connector on this device.
Humidity sensor
(B-530: Option)
Connected to the 5V
OUT connector.
Humidity Sensor
Brown White
•
Do not use the sensor in a strong electric eld environment. Measured results may not satisfy as stated.
•
5V OUT connector on this device is available for only one humidity sensor.