GRAPHTEC GL980 - 4.1 Standard Specifications

4-2
CHAPTER 4 Specication
4.1 Standard Specications
Item Description
Number of analog CHs 8CH xed
External output terminal Trigger input (1ch) or external sampling (1ch)
Logic input (4ch) or pulse input (4ch)
Alarm output (4ch) or trigger output (1ch) + alarm output (3ch)
* Trigger input and external sampling input can be switched.
* Alarm output and trigger output can be switched.
PC I/F Ethernet (10BASE-T/100BASE-TX)
USB (compatible with high-speed) standard-included
Internal memory device Internal RAM : 4MW/CH
Internal memory : Approx. 4GB Flash
SD card slot : 1* (Compatible with SDHC, up to approx. 32GByte memory available)
USB memory slot : 1* (compatible with high-speed)
Data backup functions Setting conditions: EEPROM/Clock: Lithium secondary battery
Clock accuracy
(23°C environment)
Network time setting Off: ± 0.002% (monthly difference of approx. 50 seconds)
Network time setting On: ± 0.01% (day difference about 8.6 seconds) (Maximum error after
synchronization)
Operating environment 0 to 40°C, 5 to 85% RH
(15 to 35°C when battery is used)
Power supply • AC adapter : 100 to 240 VAC, 50 to 60 Hz
• DC input : 8.5 to 24 VDC (Max 26.4V)
• Battery pack (option) : 7.2 VDC (2900 mAh), two packs can be mounted
Power consumption
• AC power consumption
(when using the AC adapter
provided as a standard
accessory)
AC100V Normal During recharging battery
When the LCD is on 34VA 47VA
When the screen saver is
operating
30VA 44VA
AC240V Normal During recharging battery
When the LCD is on 48VA 66VA
When the screen saver is
operating
43VA 62VA
• DC power consumption
+24V Normal During recharging battery
When the LCD is on 0.6A 0.9A
When the screen saver is
operating
0.53A 0.82A
+12V Normal During recharging battery
When the LCD is on 1.22A Recharging not possible
When the screen saver is
operating
1.07A Recharging not possible
+8.5V Normal During recharging battery
When the LCD is on 1.81A Recharging not possible
When the screen saver is
operating
1.55A Recharging not possible
* Normal condition: LCD brightness is set to MAX.
External dimensions
(approximate)
260(W)×161(H)×83(D) mm
Weight (approximate) *1 1.7 kg
Vibration proof Automobile parts Type 1 Class A equivalent
*1: AC adapter,battery are not included.