3-52
CHAPTER 3 Settings and Measurement
3.4 Operation Modes
Check the system operation status in the “Status Message”.
< Free Running > < Capturing > <Replaying while capturing data> < Replaying >
Operation Description Simple message display
Free Running Startup status, or data is not being captured. Free Running
Free Running XY
Capturing The data is being captured. Capturing to internal RAM
Capturing to internal memory
Capturing to SD card
Capturing to USB memory
Replaying while capturing
data
Data being captured is being replayed. Capturing and Replaying
Replaying Captured data is being replayed. Replaying from internal RAM
Replaying from internal memory
Replaying from SD card
Replaying from USB memory
Operation status transition
Free Running
[START/STOP] key [REVIEW] key
[START/STOP] key
When capture ends, the screen
automatically switches to the replay
screen.
* Data cannot be replayed right after
power-on or no data has yet been
captured.
ReplayingCapturing
Replaying while
capturing data
[QUIT] key
[QUIT] key
[REVIEW] key
The operation modes are described using the Y-T + Digital display screen.
The basic operation is the same in other screen modes.
To Next Page
Loading...
