GRAPHTEC GL980 - Language; Return to Default Settings; Information; Demo Waveform Mode

3 -117
CHAPTER 3 Settings and Measurement
(6)-10 Language
Set the display language (9 languages of Japanese, English (US), English (UK), French, German, Chinese,
Korean, Spanish and Russian).
In addition, when this setting is changed, "CSV decimal point" and "CSV delimiter" of the CSV le are
initialized.
Language CSV decimal point CSV delimiter
Japanese Period (.) Comma (,)
English(US) Period (.) Comma (,)
English(UK) Period (.) Comma (,)
French Comma (,) Semicolon (;)
German Comma (,) Semicolon (;)
Korean Period (.) Comma (,)
Chinese Period (.) Comma (,)
Russian Comma (,) Semicolon (;)
Spanish Comma (,) Semicolon (;)
(6) -11 Return to default settings
Returns all the settings to the factory defaults. When initialized, setting conditions returns to the factory
default settings.
(6)-12 Information
The system information is displayed.
(6)-13 Demo Waveform Mode
This parameter displays demo waveforms without inputting analog signal.
Setting Description
Off The demo waveform is not displayed.
On The demo waveform is displayed.
(6)-14 NAVI function
Operate the screen display procedure to perform capturing and trigger settings.
Setting Description
Easy capture setting Conditions (input, range, sapling and capturing destination, etc.) for data measurement and
data recording can be set in accordance with the instructions displayed on the screen.
Easy trigger setting The settings (trigger) for data capture can be set in accordance with the instructions
displayed on the screen.
Set this by following the instructions displayed on the menu.