GRAPHTEC GL980 - Mounting the SD Card; How to Insert the SD Card (SD CARD)

2-15
CHAPTER 2 Checks and Preparation
2.9 Mounting the SD Card
•
When a SD card is inserted, make sure that the card is not locked. If locked, data will not be recorded.
•
Please do not remove the SD card while accessing the SD card (Device Access display is displayed in
"red" and POWER LED blinks.). The captured data may get damaged.
•
When inserting a large capacity SD card, it may take some time to recognize the device.
How to insert the SD card (SD CARD)
Insert the SD card into the SD CARD slot.
(1) Open the SD CARD cover.
Cover
(2) Insert the SD card until it clicks in place.
* Make sure that the SD card is not locked.
SD CARD
x GB
Lock
* Make sure that the SD card is
not locked.
SD card
(3) Close the SD CARD cover.