3-121
CHAPTER 3 Settings and Measurement
During data replaying
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
(6)
Setting Description
(1) File Type Set the le format of data.
GBD: The data le is created in our Graphtec's binary format.
* Data cannot be changed.
CSV: The data le is created in text format.
* While GBD le is being replayed, you can duplicate it to a GBD le and convert it to a CSV
le.
* While CSV le is being replayed, you can copy to CSV le, but conversion to GBD le
cannot be performed.
(2) Name Type Set the naming method for the data le.
Auto: File name is appended automatically.
Example) 20170201-123456.GBD
Numbers part ..... Date and time when the le was created
* Example: 2017 year 2 month 1 day 12 hour 34 minute 56 second
GBD .................... Data format
GBD (binary data)
CSV (text format)
Arbitrary: Data is captured with the le name you entered.
Serial number: File is created by appending a Serial number to the arbitrarily entered le
name.
[Auto] (3) Folder Set the folder of the save destination.
[Arbitrary]
[Serial
number]
(3) Folder
File
Set the data le name.
The folder for saving the le is displayed in the Folder.
(4) Save Range Set the range of data to be saved.
All Data: All the data is saved regardless of the cursor.
Data between cursors: Data of the range between A and B cursors is saved.
(5) CSV decimal point Set the decimal point character of the CSV le.
Period (.), Comma (,)
(6) CSV delimiter Set the delimiter of the CSV le.
Comma (,), Tab, Semicolon (;)
(7)-3 Immediate backup
Perform backup processing immediately.
During the recording, you can use this function when backup setting is set to On.
Select the Immediate Backup and press [ENTER] key to perform the backup process immediately regardless
of the backup interval set in the backup setting.
* Back up data that has not been backed up yet is backed up.
* If the amount of data to be backed up increases by combining the sampling interval and backup interval, it
may take time to perform the backup process.
To Next Page
Loading...
