GRAPHTEC GL980 - Incoming Mail Server Settings; Identification Name

3 -111
CHAPTER 3 Settings and Measurement
(3) < Incoming mail server settings >
Setting Description
Incoming mail server
settings
Receive (POP3) Server Name Set the E-mail Receive Server Name (server address).
Enter the string of up to 63 characters.
* Enter the domain name or IP address.
* Enter the server name notied from the mail provider.
POP3 port number Set the port number of the E-mail Receive Server.
0 to 65535
* Enter the port number notied from the mail provider.
Time zone Set the time zone.
UTC-12:00 to UTC+13:00
* This is a common setting with time zone setting of POP3 server
setting and NTP setting.
POP3 encryption POP3 encryption
Set the encryption of POP3 server.
Off, StartTLS, Over SSL
* Set the encryption notied from the mail provider.
The same as SMTP Set whether to use the same POP3 user name and POP3 password
as SMTP user name and SMTP password.
No, Yes
POP3 user name Set the user name to log in to the POP3 server.
Enter the string of up to 63 characters.
POP3 password Set the password to log in to the POP3 server.
Enter the string of up to 63 characters.
When the authentication of the send (SMTP) server is set to “POP Before SMTP”, you must log in to the
POP3 server before accessing the send (SMTP) server.
Set the information to log in to POP3 server to the mail receive server.
However, only login to the receive server is performed and email will not be received.
(5)-6 Identication name
Set the identication name to be used with our application.
The identication name entered here will be displayed as the device name on the device search screen of
our application.